Search results for 'roof and if(1=1,BENCHMARK(5596933,MD5(0x41)),0)'

  1. Triathlon Transition Rack

    Triathlon Transition Rack

    This is our mid length triathlon bike rack, ideal for around 4-6 bikes

    Learn More
  2. Garden Dibber

    Garden Dibber

    This is the King of Dibbers and works best in prepared borders.|
    Ideal for planting bulbs, bedding plants, potatoes and anything grown in upto 3.5" pots.

    Learn More
  3. Easy Park

    Easy Park

    Simply drive upto the easy park and as your bumper touches it you will see it move towards the wall.  STOP You are home !!

    Learn More
  4. Small Garden Twine Cutter

    Small Garden Twine Cutter

    Can be clipped on the bracket (supplied) in shed or greenhouse also on belt for when moving around the garden, thus leaving both hands free.   Blade, guard and fixings on cutter are all stainless steel ensuring, even when getting wet it will not rust.
    Supplied with 60 meter ball of 3 ply jute.

     

    Learn More
  5. Garden Line Measure

    Garden Line Measure

    12 Metres of high quality, non stretch cord marked every 15cms (6") allowing plants or vegetables to be spaced evenly.
    Pegs are hand turned beech.

    Learn More
  6. Plant Supports

    Plant Supports

    These plant supports come in four sizes, 20cm (8"), 41cm (16"), 51cm (20") and 61cm (24") and are supplied as a pair.
    The ring and bracket are galvanised steel with stainless steel fixings ensuring they will not rust.
    They are fully adjustable to fit any height or type of plant.   Ideal for growing climbing plants or climbing vegetables.

    *Subject to height of cane

    Learn More
  7. Easy cane inserter

    Easy cane inserter

    The new easy cane inserter is designed to allow you to push canes easily and splinter free into the ground
    Simply clip your cane against the handle leaving approximately 25cm of cane below the bottom bar, squeeze both handles together so that the rubbers grip the base of the cane.
    Put your foot onto the bar and push into the ground.
    To remove cane, use as above but instead of pushing foot on bar, pull handles upwards.

    Can be adjusted to suit most cane diameters

    Learn More
  8. 'V' Type Stand Off

    'V' Type Stand Off

    Aluminium ladder attachment that has been heat treated for extra strength and fits most ladders easily using spring form technology.   Specially designed to fit round corners and over guttering making safer working practice.   The 'V' Type stand off will hold your ladder 250-400mm clear of the wall.
    Heat treated for extra strength
    Quick and easy to attach using spring form
    Can be used on flat surfaces, corners or to straddle down pipes.
    Supplied flat packed
    Shipping weight 2.4 kgs
    Max load 110 kgs

    Learn More
  9. 5 Section Dual Height Cycle Rack- Flat Top

    5 Section Dual Height Cycle Rack- Flat Top

    Measurements: 1360 x 400 x 300mm.
    Manufactured from 19.5mm Tube.
    Zinc and clear plated for extra corrosion resistance.
    Dual Height design to help prevent handle bars clashing.
    Face to face or side by side parking.
    Flat Top to help prevent damage to disc brakes.
    50mm max tyre width.
    Ideal for Children’s bikes and bikes with disc brakes.
    Weight 5Kgs.

    Learn More
  10. Ladder Safety Legs

    Ladder Safety Legs, Anti Slip Ladder Legs, Stabiliser Legs.

      

    • Helps prevent outward slip of ladder
    • Increases stability of your ladder
    • Weight 4.5 Kg
    • Electro plated finish for extra corrosion resistance
    • Maximum stile dimension 34mm wide x 100mm deep
    • Held in position with ‘U’ bolts and hand wheels
    • Quick and easy to assemble
    • Large rubber feet for added grip

     

                Three hole adjustments for different stile widths

    Learn More
  11. Telescopic Secuirty Post

    Ultimate Telescopic Security Post

    BRITISH MADE

    Fully telescopic security post sits flush to the ground when not in use
    Hole depth required for the bollard 850mm below ground
    Stands 550mm above ground when in use
    Internal locking bar for extra security
    Padlock sited at the top of the post for ease of use
    Zinc plated finish for extra corrosion resistance
    Manufactured from 100 x 100 x 5mm box section
    Comes with 70mm stainless steel discus padlock with 2 keys
    Simply pull post by hand to lock in place

    Learn More
  12. 4 Section Stand Alone Cycle Rack

    4 Section Stand Alone Cycle Rack

    Measurements:1050mm x 390mm x 240mm . Weight 4.5Kg. Heavy-duty rack with four-cycle capacity, manufactured from steel with a zinc plating for extra corrosion resistance. The Racks are freestanding, but for increased stability can be secured to the ground,,all racks are pre-drilled for easy floor or wall fixing Learn More
  13. 2 Section Dual Height Flat Top Long Length

    2 Section Dual Height Flat Top Long Length

    Measurements: 490mm x 400mm x 300mm.
    Manufactured from 19.5mm Tube.
    Zinc and clear plated for extra corrosion resistance.
    Dual Height design to help prevent handle bars clashing.
    Face to face or side by side parking.
    Flat Top to help prevent damage to disc brakes.
    50mm max tyre width.
    Ideal for Children’s bikes and bikes with disc brakes.
    Weight 5Kgs.

    Learn More
  14. 3 Section Dual Height Flat Top Long Length

    3 Section Dual Height Flat Top Long Length

    Measurements: 850mm x 400mm x 300mm
    Manufactured from 19.5mm Tube.
    Zinc and clear plated for extra corrosion resistance.
    Dual Height design to help prevent handle bars clashing.
    Face to face or side by side parking.
    Flat Top to help prevent damage to disc brakes.
    50mm max tyre width.
    Ideal for Children’s bikes and bikes with disc brakes.
    Weight 5Kgs

    Learn More
  15. 4 Section Dual Height Flat Top Long Length

    4 Section Dual Height Flat Top Long Length

    Measurements: 1260 x 400 x 300mm. Manufactured from 19.5mm Tube. Zinc and clear plated for extra corrosion resistance. Dual Height design to help prevent handle bars clashing. Face to face or side by side parking. Flat Top to help prevent damage to disc brakes. 50mm max tyre width. Ideal for Children’s bikes and bikes with disc brakes. Weight 5Kgs. Learn More
  16. 5 Section Dual Height Flat Top Long Length

    5 Section Dual Height Flat Top Long Length

    Measurements: 1600mm x 400mm x 300mm.
    Manufactured from 19.5mm Tube.
    Zinc and clear plated for extra corrosion resistance.
    Dual Height design to help prevent handle bars clashing.
    Face to face or side by side parking.
    Flat Top to help prevent damage to disc brakes.
    50mm max tyre width. Ideal for Children’s bikes and bikes with disc brakes.
    Weight 5Kgs.

    Learn More
  17. 2 Section Dual Height Cycle Rack- Flat Top

    2 Section Dual Height Cycle Rack- Flat Top

    Measurements: 500mm x 400mm x 300mm.
    Manufactured from 19.5mm Tube.
    Zinc and clear plated for extra corrosion resistance.
    Dual Height design to help prevent handle bars clashing.
    Face to face or side by side parking.
    Flat Top to help prevent damage to disc brakes.
    50mm max tyre width.
    Ideal for Children’s bikes and bikes with disc brakes.
    Weight 3.25Kgs.

    Learn More
  18. 4 Section Dual Height Cycle Rack- Flat Top

    4 Section Dual Height Cycle Rack- Flat Top

    Measurements: 1050mm x 400mm x 300mm.
    Manufactured from 19.5mm Tube.
    Zinc and clear plated for extra corrosion resistance.
    Dual Height design to help prevent handle bars clashing.
    Face to face or side by side parking.
    Flat Top to help prevent damage to disc brakes.
    50mm max tyre width.
    Ideal for Children’s bikes and bikes with disc brakes.
    Weight 4.5Kgs.

    Learn More
  19. Vertical 5 Cycle Rack

    Vertical 5 Cycle Rack

    Stores 5 bikes safely in a minimal space off floor.
    Ideal for flats or apartments where floor space is an issue.
    Needs to be anchored to a suitable wall structure.
    Zinc & clear for extra corrosion resistance.
    Supplied with 2 brackets and fixings.
    Plastic coated hooks to help prevent damage to cycle wheels.
    930mm x 400mm x 290mm.
    Weight 4.30 kg.

    Learn More
  20.  Section Stand Alone Cycle Rack

    2 Section Stand Alone Cycle Rack

    Measurements: 500mm x 390mm x 240mm . Weight 3.25Kg. Heavy-duty rack with two-cycle capacity, manufactured from steel with a zinc plating for extra corrosion resistance. The Racks are freestanding, but for increased stability can be secured to the ground. All racks are pre-drilled for easy floor or wall fixing. Learn More
  21. 3 Section Dual Height Cycle Rack- Flat Top

    3 Section Dual Height Cycle Rack- Flat Top

    Measurements: 730mm x 400mm x 300mm.
    Manufactured from 19.5mm Tube.
    Zinc and clear plated for extra corrosion resistance.
    Dual Height design to help prevent handle bars clashing.
    Face to face or side by side parking.
    Flat Top to help prevent damage to disc brakes.
    50mm max tyre width.
    Ideal for Children’s bikes and bikes with disc brakes.
    Weight 3.5Kgs.

    Learn More
  22. 5 Section cycle rack with feet

    5 Section cycle rack with feet

    Measurements: 1360 x 400 x 300mm
    Deluxe cycle rack in zinc & clear plating for extra corrosion resistance
    Dual height helps prevent handle bars clashing
    Can be easily anchored to the ground with the anchor brackets to maximise security Maximum 50mm tyre width

    Learn More
  23. 5 Section dual height

    5 Section Dual Height Cycle rack

    Measurements: 1310mm x 400mm x 390mm
    Weight: 5 kg
    Zinc & clear plated for extra corrosion resistance
    Face to face or side by side parking
    Dual height helps prevent the handle bars clashing

    Learn More
  24. Trestle

    Stand Firm Adjustable Trestle

    Ideal for the tradesman or handyman an ideal work platform

    • Easy to assemble
    • For those difficult jobs where a sturdy platform is essential
    • Fully adjustable trestle with four locking height adjustments
    • Height settings 630mm, 730mm, 830mm and 930mm
    • Wood support 1 metre length
    • Maximum load 150Kgs
    • Legs fold for easy storage
    • Shipping weight 10Kg
    Learn More
  25. Ladder Stabiliser Legs

    Stabiliser Legs

    Makes ladders and steps safer.

    • Transforms the stability of ladders and steps
    • 3 models available 900mm, 1200mm, 2140mm
    • Fits most ladders and steps
    • Quick to attach comes complete with drilling template and fixing bolts
    • Additional leg locking clamps provided on longer model
    • Minimum style depth 65mm
    • Patent application number 0609282.9
    Learn More